|
X-10 Plug-in Isolator (110V @ 5A)
Devices like electronic ballasts and large motors can generate sufficient noise to effect reliable X-10 operation. A simple way to filter out this noise is with the Plug-in Isolator. Simply plug the device into the Isolator, then plug the Isolator into the Satellite Module.
Specifications:
• 120VAC • 5A |
|
OUR PRICE $29.40 |
|
|
X-10 Heavy Duty Wall Receptacle Control Module (125V @ 20A) |
|
|
OUR PRICE $128.80 |
|
|
X-10 Wall Receptacle Control Module (125V @ 15A)
By receiving command signals from the X-10 Control Interface, the Satellite Modules turn external devices on/off. Each module is set to a unique “address” using the dials on the front of the Module. Replaces existing wall outlet. One module is required for each external device to be controlled. 1 year warranty.
Specifications:
• 125VAC
• 20A resistive load
• 1HP motor load
• 1500 Watts incandescent |
|
|
OUR PRICE $43.40 |
|
|
X-10 Pro Plug-in Control Module (110V @ 15A)
By receiving command signals from the X-10 Control Interface, the Satellite Modules open/close contacts to turn external devices on/off. Each module is set to a unique "address." Satellites plug directly into existing grounded electrical outlets. One module is required for each device. 1-year warranty.
Specifications:
• 120VAC
• 15A resistive load
• 1/3HP motor load
• 500 Watts incandescent |
|
|
OUR PRICE $29.40 |
|
|
X-10 Pro Powerline Interface
The X-10 Control Interface plugs into a standard wall outlet and connects to the Octopus via a 7 ft. RJ-11 cable. The Control Interface transmits X-10 command signals via the existing AC wiring to turn external devices on/off using X-10 Satellite Modules. The Control Interface is required to perform any control functions. 120VAC @ 60 Hz. 1-year warranty. |
|
|
OUR PRICE $37.80 |
|
