© 2003 Reef Splendor, Inc.
|
|
Conductivity Cell
3/4 in. In-Line Probe Holder pre-installed in a 3/4 in. PVC T-fitting. To ensure accurate measurements the probe must be installed either in-line or in a “drip cup” installation (see Users Manual for details). Compatible with both Standard and Laboratory Grade Conductivity Probes. 1-year warranty.
Note: The Conductivity Cell creates a constant volume of water around the electrodes allowing for accurate and repeatable measurements. |
|
OUR PRICE $15.40 |
|
|
1/2" In-line Probe Mounting Gland (Compression Fitting)
Allows Laboratory Grade Probes (except conductivity) to be placed directly into new or existing water lines for accurate measurements as water continuously flows across the electrodes. FTP fitting screws directly into PVC T-fitting for easy installation. Ball Valves should be placed at either end for easy removal during maintenance and calibration. 1-year warranty.
Notes: For accuracy, the Temperature Probe must be installed within 6 in. of both the pH and ORP PRobes. See 3/4 in. In-Line Probe Holder (44-000638) and Conductivity Cell (44-010711). |
|
|
OUR PRICE $7.00 |
|
|
3/8" In-line Probe Mounting Gland (Compression Fitting)
Allows Standard Grade Probes (except conductivity) to be placed directly into new or existing water lines for accurate measurements as water continuously flows across the electrodes. FTP end screws directly into a PVC T-fitting for quick installation. Ball valves should be placed at either end for easy removal during maintenance and calibration. 1-year warranty.
Notes: For accuracy, the Temperature Probe must be installed within 6 in. of both the pH and ORP PRobes. See 3/4 in. In-Line Probe Holder (44-000638) and Conductivity Cell (44-010711) for standard grade conductivity probes. |
|
|
OUR PRICE $7.06 |
|
|
1/2" In-tank Probe Holder (Bracketed Suction Cups)
1/2 in. bracketed suction cup allows Laboratory Grade Probes (except conductivity) to be placed anywhere within the body of water. At least one holder is required per probe. Pack of two holders.
Notes: A location should be chosen such that the probes are never fully submersed or the probe tips are allowed to be exposed to the air for extend periods of time and dry out. |
|
|
OUR PRICE $7.06 |
|
|
